PUMPS

• Pressures To 7 Bar (102 PSI)
• Models: Blagdon Standard, ATEX Cat 2
• Flow Rates Up To 500 Litres/Minute (110 Gal/Min)
• Connections: BSP, Tri-Clamp Electro-Polished
• Wetted Components: 316L Stainless Steel
• Non-Wetted Components: Aluminum, Stainless Steel
• Valve Seats: 316L Stainless Steel
• Valve Balls: EPDM Food Grade, 316 Stainless Steel, PTFE
• Diaphragms: EPDM Food Grade, PTFE, One Piece PTFE

• Pressures To 16 Bar (232 PSI)
• Models: Blagdon Standard, ATEX Cat 2
• Flow Rates Up To 350 Litres/Minute (92 Gal/Min)
• Connections: BSP
• Wetted Components: Aluminum, Stainless Steel
• Non-Wetted Components: Aluminum, Stainless Steel
• Valve Seats: Stainless Steel, Aluminum, Buna-N, EPDM, Neoprene, PTFE
• Valve Balls: PTFE, Neoprene, Buna-N, EPDM, Stainless Steel, Viton
• Diaphragms: PTFE, Neoprene, Buna-N, Santoprene, One-Piece PTFE,
• Polyester (Hytrel), Polyurethane, EPDM

• Pressures To 8.6 Bar (125 PSI)
• Models: Blagdon Standard, ATEX Cat 2
• Certified CIP Cleanable
• Flow Rates Up To 500 Litres/Minute (132 Gal/Min)
• Connections: RJT-Male
• Wetted Components: 316L Stainless Steel (Polished)
• Non-Wetted Components: Nickel Plated Aluminum, 316 Stainless Steel
• Valve Seats: EPDM (Food Grade), PTFE
• Valve Balls: EPDM (Food Grade), 316 Stainless Steel, PTFE
• Diaphragms: EPDM Food Grade, One Piece PTFE

• Self-Priming, Ideal For Emptying Containers
• Models: Standard Or ATEX Cat: 2
• Pressures To 8.6 Bar (125 PSI)
• Flow Rates Up To 889 Liters/Minute (234.8 Gal/Min)
• Wetted Components: 316L Stainless Steel Or Aluminum
• Non-Wetted Components: 316L SST, Aluminum Or Cast Iron.
• Available Diaphragms: Buna-N, EPDM, Polyester, Neoprene, Santoprene, PTFE, Viton, Polyurethane, One Piece PTFEssures to 8.6 bar (125psi).

• Applications: Ceramics, Chemical & Petrochemical, Coatings, Food & Beverage, and Wastewater

• Self-Priming, Ideal For Emptying Containers
• Models: Standard Or ATEX Cat: 2
• Pressures To 8.6 Bar (125 PSI)
• Flow Rates Up To 901 Liters/Minute (238 Gal/Min)
• Wetted Components: Polypropylene, Conductive Poly. (ATEX Cat 2), PVDF (Kynar),
• Non-Wetted Components: Polypropylene (Glass Filled), Aluminum / Epoxy Coated, St. Steel / Epoxy Painted
• Diaphragms: EPDM, Polyester, Santoprene, PTFE, Viton, One Piece PTFE, Polyurethane, Polyester (Hytrel)

• Available In Virgin And Conductive PTFE
• Chemically Inert
• ATEX Approved – Intrinsically Safe
• Pressures To 7 Bar (102 PSI)
• Models: Blagdon Standard, ATEX Certified
• Flow Rates Up To 136 Liters/Minute (36 Gal/Min)
• Wetted Components: PTFE, Conductive PTFE
• Non-Wetted Components: Conductive PTFE, Polyethylene (HDPE)  
• Applications: Ceramics, Chemical & Petrochemical, Coatings, Food & Beverage, and Wastewater

Magnum pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 10×8×14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. Standard models are equipped with a heavy-duty 2½-in. shaft protected by a stainless-steel shaft sleeve, double-row outboard bearings, and inboard roller bearings. They are rated for continuous service in applications up to 200 hp.

National Oilwell Varco's Mission 1180 Type "S" centrifugal pumps are designed with a concentric casing and semi-open impeller that makes them an ideal selection when handling clear or abrasive fluids. 

The concentric casing long life design of the Mission 1780 Type "W" centrifugal pumps has virtually eliminated the high pressure duplex mud mixing system and has allowed operators to reduce their initial and operating costs. 

Hydra-Cell Technology. 3 Models (Q155E, Q155F, Q155H) With A Range Of Different Specifications To Meet Your Needs. Seal-less Design Eliminates Leaks, Hazards And The Expense Associated With Seals And Packing. Can Operate With A Closed Or Blocked Suction Line And Run Dry Indefinitely Without Damage.

Available Diaphragms: 

• FKM, Buna-N

Flow Rates: 

• 111 GPM To 157 GPM (Models Vary)

Discharge Pressure: 

• 500 PSI to 2100 PSI (Models Vary)

Temperature Range: 

• 40⁰ Up To 180

Hydra-Cell Technology, Available To Meet API 674

Seal-less Design Eliminates Leaks, Hazards And The Expense Associated With Seals And Packing. Can Operate With A Closed Or Blocked Suction Line And Run Dry Indefinitely Without Damage. 

Available Diaphragms: 

• FKM, Buna-N

Flow Rates:

• Up To 26 GPM

Discharge Pressure: 

• Up To 5000 PSI

Temperature Range: 

• 40⁰ Up To 180⁰ F

Hydra-Cell Metering Solutions. Electronic Precision Metering Pumps. Built To Exceed API 675 Performance Standards With “Pulse-Free” Linear Flow. Hydra-Cell Uses Variable Frequency Drive (Vfd) Electronic Flow Adjustment To Maintain Greater Accuracy Throughout The Turndown Range.

Available Diaphragms: 

• PTFE, Viton, Buna, EPDM, Neoprene, Aflas

Flow Rates: 

• Up To 900 GPH (15 GPM)

Wanner Engineering Hydra-Cell Pump Specifications: 

Positive Displacement Pump With Hydraulically Balanced, Unstressed Diaphragms. Seal-Less Design. Minimal Maintenance, No Seals, Cups, Or Packing To Leak, Wear, Or Replace. Handles Liquids To Highly Viscous Resins And Slurries. High Efficiency, Low Power Consumption.

Flow Capabilities:

• From 0.11 GPM To 157 GPM

Pressure Ratings: 

• To 5000 PSI

NOV Industrial Pumps

• Tarby Century V / Moyno 2000G1
• Capacities Up To 1,025 GPM
• Pressures To 500 PSI

Available In Cast Iron Or Stainless Steel Stator Materials Of Construction:

• EPDM, Buna
• Fluoroelastomer, Buna (Food Grade), Nitrile Or Natural Rubber

Typical Applications:

• Joint Cement
• Slurries
• Sheer Sensitive Polymers
• Resins
• Sludge Transfer
• Clay Slurry
• Latex

NOV Industrial Pumps

• Tarby Century III / Moyno L Series
• Capacities Up To 400 GPM
• Pressures To 760 PSI

Available In Cast Iron Or Stainless Steel Stator Materials Of Construction: EPDM, Fluoroelastomer,

• Nitrile Or Natural Rubber

Typical Applications:

• Industrial Effluent
• Hydrated Lime Slurry
• Sludge
• Milk Curds, Sauces, Fruit Juices
• Industrial Chemicals And Detergents
• Coating Clays, Gypsum And Silicate
• Agricultural Slurries

Tarby And Moyno Are Now Part Of National Oilwell Varco (NOV.) NOV Universal Parts Are Manufactured Using High-Quality Materials, Heat Treatment Processes And Coatings To Ensure That The Parts Are:

• Dimensionally Accurate
• Of The Correct Material Specification
• Offer Optimum Performance
• NOV Universal Parts Have The Same Warranties And Guarantees As Parts For Mono™ / Moyno™

NOV Universal Parts Provides Parts Suitable For The Following Brands:

• Seepex™
• Netzsch™
• PCM™
• Allweiler™
• Orbit™